RadWagon 4 Running Boards Installation Guide

Follow the steps below to install the RadWagon running boards on your bike.

Caution.png If you are not confident in your ability to successfully and safely perform all steps, we recommend having the work performed or checked by a local, certified, and reputable bike mechanic.
  1. Get the bike ready for maintenance. Turn off the bike, remove the battery, and press and hold the MODE button to discharge remaining power.
  2. Click HERE to access the installation instructions.
  3. Once the accessory is installed, reinstall the battery, test the bike fully, and ride Rad!

Need more assistance?  Submit a request