RadWagon 4 Deckhand installation guide

Follow the steps below to install the RadWagon deckhand on your bike.

RW4_Deckhand_fig1.png

Caution.png If you are not confident in your ability to successfully and safely perform all steps, we recommend having the work performed or checked by a local, certified, and reputable bike mechanic.
  1. Get the bike ready for maintenance. Turn off the bike, remove the battery, and press and hold the MODE button to discharge remaining power.
  2. Click HERE to access the installation instructions.
  3. Once the accessory is installed, reinstall the battery, test the bike fully, and ride Rad!

Was this article helpful?

Need more help?

Chat:
Click the "We're online" button in the lower right corner of your screen to connect with a Customer Support agent live.
Mon-Fri: 9 am-3 pm PST

Message us:
Send us an email request and a Support agent will contact you.
US: support@radpowerbikes.com
CAN: can-support@radpowerbikes.com