GUB Pro-3 phone mount installation guide

The GUB PRO-3 phone mount accessory can be installed onto your ebike's handlebar so you can take your phone with you every time you ride Rad!


Follow the instructions below to install the accessory.

Caution.png If you are not confident in your ability to successfully and safely perform all steps, we recommend having the work performed or checked by a local, certified, and reputable bike mechanic. 

You will need:

  • 3 mm Allen wrench
  • 4 mm Allen wrench
  • The phone mount accessory and included hardware
  1. Get the bike ready for maintenance. Turn off the bike, remove the battery, and press and hold MODE (or the power button) to discharge remaining power.
  2. Follow the manufacturer's instructions HERE to install the accessory.
  3. Reinstall the battery and test the bike fully before riding.

Was this article helpful?

Need more help?

Click the "We're online" button in the lower right corner of your screen to connect with a Customer Support agent live.
Mon-Fri: 9 am-3 pm PST

Message us:
Send us an email request and a Support agent will contact you.