Hardshell Spare Lock Cores installation instructions

The Hardshell Spare Lock Cores from Rad Power Bikes can be installed on multiple Rad Power Bikes accessories, including the Hardshell Locking Pannier, the Hardshell Locking Box, and other hardshell accessories (sold separately) to allow the use of a single key with these accessories.


Caution.png If you are not confident in your ability to successfully and safely perform all steps, we recommend having the work performed or checked by a local, certified, and reputable bike mechanic.
  1. Get the bike ready for maintenance. Turn off the bike, remove the battery, and press and hold MODE (or the power button) to discharge remaining power.
  2. Click HERE to access the installation instructions.
  3. Once the spare lock cores are installed, reinstall the battery, test the bike fully, and ride Rad!


Was this article helpful?

Need more help?

Click the "We're online" button in the lower right corner of your screen to connect with a Customer Support agent live.
Mon-Fri: 9 am-3 pm PST

Message us:
Send us an email request and a Support agent will contact you.
US: support@radpowerbikes.com
CAN: can-support@radpowerbikes.com